31
EN
Useful information
C
Troubleshooting
Your dryer is fitted with systems that continuously perform checks during the drying process
to take the necessary measures and warn you in case of any malfunction.
WARNING:
If the problem persists even if you have applied the steps in
this section, please contact the your dealer or an Authorised
Service Provider. Never try to repair a nonfunctional product.
Problem Reason Solution
The drying process
takes a long time.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm
water.
The heat exchanger might be
clogged.
Clean the heat exchanger.
The ventilation grills in front of
the machine might be closed.
Open the doors/windows to
prevent the room temperature
from rising too much.
There might be a layer of
limescale on the humidity
sensor.
Clean the humidity sensor.
The dryer might be overloaded
with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on
your washing machine.
To Next Page
Loading...
