32
EN
Useful information
C
Problem Reason Solution
Laundry comes out
damp at the end of
the drying process.
WARNING:
The laundry that comes out hot at the
end of the drying process generally feels
more humid.
The programme used might
not be suitable for the type of
laundry.
Check the care labels on the
laundry items, select a suitable
programme for the type of
laundry and additionally, use the
time programmes.
The surface of the lint filter
might be clogged.
Wash the filter with lukewarm
water.
The heat exchanger might be
clogged.
Clean the heat exchanger.
The dryer might be overloaded
with laundry.
Do not overload the dryer.
The laundry might be
insufficiently spun.
Select a higher spin speed on
your washing machine.
The dryer cannot
be opened or the
programme cannot
be started. The
dryer does not get
activated when
adjusted.
The dryer might not be plugged
in.
Make sure that the plug is fitted
in the socket.
The loading door might be open.
Make sure that the loading door
is properly closed.
You might not have set a
programme or pressed the
Start/Pause key.
Make sure that the programme
has been set and the dryer
is not in the Standby (Pause)
mode.
Child lock might be active. Deactivate the child lock.
The programme has
been interrupted for
no reason.
The loading door might not be
closed properly.
Make sure that the loading door
is properly closed.
There might have been a power
failure.
Press the Start/Pause key to
start the programme.
The water tank might be full. Empty the water tank.
To Next Page
Loading...
