20
Cleaning and maintenance
C
Trouble Shooting
Many malfunctions and faults that might occur in daily operation can be easily remedied.
Time and money will be saved because a service call won’t be needed. The following guide
may help you to find the reason for a malfunction and correct it.
Display Reason Solutions
• Container is full
•
Water pump failure or water level
sensor failure
• Empty water container
“E32” • Humidity sensor error
•
Please contact your local service
center if the problem occurs.
“E33” • Temperature sensor error
“E82”
• PCB communication error
•
This product contains a light source exempted of energy
efficiency class.
•
Light source in this product can only be replaced by qualified
professionals.
• Please contact after-sales service if the light source fails.
•
The light source shall be removed at the end of the product’s
useful life, with sorting and recycling done separately.
Warning!
• Only authorised technicians can carry out repairs.
•
Self-repair or non-professional repair may create safety
risk and cease the guarantee.
•
If the LED displays other prompt and the dryer does
not work, please call the service.
To Next Page
Loading...
