5-WATT AMPLIFIED HORNS
MODEL V-1030C, V-1030M
TECHNICAL
SPECIFICATIONS
5614 Hollins Road Roanoke, Virginia 24019 Phone: 540-563-2000 Fax: 540-362-9800
E-Mail: support@valcom.com www.valcom.com
SPECIFICATIONS:
FEATURES:
INDOOR/OUTDOOR USE
BUILT-IN 5 WATT AMPLIFIER MODULE
HIGH IMPACT ABS HOUSING
BUILT-IN VOLUME CONTROL
OMNI-DIRECTIONAL MOUNTING BASE
WALL OR ELECTRICAL BOX MOUNT
OPERATES ON -24 VDC POWER SUPPLY
I-BEAM CLAMP INCLUDED
DESCRIPTION: The V-1030C and V-1030M are weather resistant, reentrant, 5 watt amplified horn speaker,
complete with 5 watt amplifier, volume control, horn housing, mounting base and I-beam clamp.
SOUND PRESSURE LEVELS
116 dB measured at 4' (1.22 m) on axis with
a -10dBm input at 1 kHz
FREQUENCY RESPONSE
225 Hz to 14 kHz
DISPERSION
120° Horizontal and 90° Vertical
AMPLIFIER MODULE
Rated Output: 5 Watts RMS
Output Load: 8 Ohms
Input Impedance: 600 Ohms (1 kHz at rated output)
Power Supply: -24 Vdc nominal, positive ground
Operating Current: 300 mA at -24 Vdc
MOUNTING
Omni-Directional mounting fully adjustable,
360°
horizontal and 160° vertical. Detachable
base for wall or electrical box mounting with I-
beam clamp included.
HOUSING AND FINISH
The horn is made of high impact ABS plastic.
The mounting base is constructed of ultra high
impact LEXAN
®
plastic.
DIMENSIONS AND WEIGHT
7.38” (18.75 cm) H x 10.0” (25.4 cm) W x 10.50”
(26.67 cm) D
Weight: 4.75 lbs (2.2 kg.)
ENVIRONMENT
Temperature: -20 to +55 °C (-4 to +131 °F)
Humidity: -0-95% Non-Condensing
To Next Page
Need help?
General
Weight and Dimensions
