Valcom V-1030C User Manual

VSP-V-1030C/1036C
Issue 8
1 947031
V-1030C and V-1036C
PAGING HORN AMPLIFIER ASSEMBLIES
INTRODUCTION
This instruction contains the specifications and
information necessary to install, operate, and maintain
the V-1030C and the V-1036C Paging Horn Amplifier
Assemblies.
This equipment has received FCC type KX
registration, designed to be used with FCC registered
Key Telephone Systems. In accordance with FCC
Rules with applicable tariffs, this Paging Unit may
only be installed with the authorization of the host
system. Installations may be made by Valcom, Inc.,
an authorized agent of the same, equipment
manufacturers, telephone companies, registered
telephone refurbishers, and those qualified for
installation of FCC registered systems under FCC
Rules Section 68.215.
The FCC Registration Number,
BAFUSA-69358-KX-N, will be listed in the affidavits
filed with the Telephone Company; it will also be
recorded in the system log kept by installation and
maintenance personnel. The local Telephone
Company is to be notified of the FCC Registration
Number when this Paging Unit is installed.
SPECIFICATIONS
Description
The V-1030C and V-1036C are Paging Horn/ Amplifier
Assemblies. The V-1030C is a self- contained 5 Watt
paging system with a 5 Watt amplifier; the V-1036C is
a self-contained 15 Watt paging system with a 15
Watt amplifier. Both units incorporate a high
efficiency horn with a volume control.
Applications
• Use with Valcom page control
• Expanding the capability of telephone systems
which contain limited paging capabilities
• Loud ringer application in systems where
loud-speaker tone signaling is employed
V-1030C - Nominal Specifications
Input Impedance: 1000 Ohms nominal
Input level: -15dBm to +10dBm
Current at -24VDC: 300mA
V-1036C - Nominal Specifications
Input Impedance: 1000 Ohms nominal
Input level: -15dBm to +10dBm
Current at -24VDC: 900mA
Dimensions/Weights
• V-1030C - 7.38" H x 10.00" W x 10.40" D
(18.75cm H x 25.40cm W x 26.42cm D)
• 3.6 lbs. (1.63 kg)
• V-1036C - 7.38" H x 10.00" W x 10.40" D
(18.75cm H x 25.40cm W x 26.42cm D)
• 3.7 lbs. (1.68 kg)
Environment
• Temperature: -20 to +55 Degrees C
• Humidity: 0 - 95% non-precipitating

Valcom V-1030C Specifications

General

Tweeter	-
Speaker type	1-way
Number of drivers	1
Speaker placement	Wall-mountable
Audio output channels	1.0 channels
Certification	FCC
Product color	Beige
Housing material	Plastic
Recommended usage	Other
Impedance	8 Ω
Frequency range	225 - 14000 Hz
RMS rated power	5 W
AC adapter output voltage	24 V
AC (power) in	Yes
Connectivity technology	Wired
AC adapter output current	0.3 A

Weight and Dimensions

Depth	266.7 mm
Width	254 mm
Weight	2200 g

Summary

Introduction to Paging Horn Amplifier Assemblies

Specifications for Paging Horn Amplifier Assemblies

Description of V-1030C and V-1036C

Details the V-1030C and V-1036C as self-contained paging horn/amplifier assemblies with different wattage capabilities.

Applications of Paging Units

Lists common applications such as use with Valcom page control and as loud ringers in telephone systems.

V-1030C Nominal Specifications

Provides electrical specifications for the V-1030C model, including input impedance, input level, and current draw.

V-1036C Nominal Specifications

Provides electrical specifications for the V-1036C model, including input impedance, input level, and current draw.

Dimensions and Weights

Lists the physical dimensions and weight for both the V-1030C and V-1036C paging horn amplifier assemblies.

Environmental Operating Conditions

Specifies the operating temperature and humidity ranges for the paging horn amplifier assemblies.

Horn Spacing Guidelines

Horn Coverage and Spacing Table

Presents spacing recommendations for V-1030C and V-1036C based on location noise levels and coverage area.

Definitions for Horn Spacing

Defines 'Quiet', 'Moderate', 'Noisy', and 'Very Noisy' environments for determining horn spacing.

Installation Instructions

Wiring Connections

Details the wiring connections using twisted pair wire for audio and power inputs.

Attaching Speaker to Base

Provides steps for attaching the speaker base to the horn unit.

Mounting the Horn Assemblies

Gives instructions for mounting the horns to walls, beams, or electrical boxes at optimal heights.

Technical Assistance and Troubleshooting

Technical Assistance Information

Provides contact information and advice for obtaining technical support and troubleshooting assistance from the factory.

Troubleshooting Chart: No Sound

Lists probable causes and corrections for issues resulting in no sound from the paging unit.

Troubleshooting Chart: Low Volume

Lists probable causes and corrections for issues resulting in low volume from the paging unit.

Troubleshooting Chart: Loud Squeal

Lists probable causes and corrections for issues resulting in a loud squeal from the paging unit.

Valcom Limited Warranty

Warranty Coverage and Limitations

Details the one-year warranty period, obligations, exclusions, and claims process for Valcom products.