Valcom VIP-480L - User Manual

1 947630
ISSUE 1
VIP-480L IP Paging Horn
INTRODUCTION
The VIP-480L IP Paging Horn is a self contained
paging system which enables voice paging up to
1200 feet from an Ethernet connection. The
VIP-480L consist of a high efficiency 3 Watt
Class-D Horn and a VIP-LLE Network Extender
allowing stand alone capability when used with a
SIP Phone System or can be accessed from a
variety of Valcom managed VoIP products.
SPECIFICATIONS
Access Methods
• PBX, FXO Port w/VIP-811
• POTS telephone set w/VIP-811
• PBX, FXS Port w/VIP-821
• Valcom M Cast Page Group
• SIP
Features
• RJ-45 network connection
• LED Status Indicator
• Network activity LEDs
• 802.3af compliant
• High Efficiency Class-D 3 Watt Amplifier
Dimensions/Weight
(HORN)
• 6.8”H x 8.3”W x 3.3” D
(17.3cm H x 21.1cm W x 8.4cm D)
• 2.1 lbs. (0.95 kg)
Network Extender
(VIP-LLE)
• 1.30” H x 6.10" W x 6.00" D
(3.51 cm H x 15.72 cm W x 13.51 cm D)
• Weight: 0.85 lbs. (0.39 kg)
Nominal Specifications – HORN
Input Impedance: 600 Ohms
Input Level: -10dBm
Output Impedance: 600 Ohms
Output Level: -10dBm nominal
Nominal Specifications – VIP-LLE
Via 802.3af PoE Ethernet Switch:
Class 3 (12.95W)
Environment
Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating
Packing List
Qty Item
1 VIP-LLE Network Extender
1 3 Watt High Efficiency Horn
1 VSP Document
2 Mounting Brackets
1 VIP Quick Start Guide
4 Rubber Feet
4 Wood Screws
1 RJ-45 Termination Block
1 RJ-45 Patch Cable
1 “C” Clamp

Summary

VIP-480 L Installation Guide

FCC Compliance Information

Safety Precautions and Symbols

Explains safety warnings and associated symbols for user guidance.

VIP-LLE Mounting Options

Describes how to mount the VIP-LLE Network Extender on a shelf or wall.

Horn Mounting Options

Covers flush mount, universal bracket, and 'C' clamp mounting for the horn.

Interconnections and Powering

Explains how to power the unit via PoE and make signal connections.

VIP-LLE Network Connection Details

VIP-LLE Signal Connection Details

VIP-LLE Status Indicator Lights

VIP-480 L Operation

Technical Assistance and Support

Factory Technical Support

Provides contact information for factory technical support and troubleshooting.

Repair and Return Procedure

Flush Mount Installation

Valcom VIP-480L Specifications

General

Power Rating	30W
Impedance	8 Ohms
Dimensions	11.25" H x 9.25" W x 10.5" D (28.58 x 23.49 x 26.67 cm)
Weight	6.8 lbs (3.08 kg)
Mounting	Surface Mount
Type	Horn
Operating Temperature	-22° F to +131° F (-30° C to +55° C)
Sound Pressure Level (SPL)	110 dB