5
Zone 6 Auxiliary – K6 Relay
The V-2006A/V-2006AHF contains an auxiliary set of
make/break contacts which can be used to operate
mute contacts on a high powered amplifier or other
peripheral devices. Zone 6 dry contact closure
operates when Zone 6 is activated alone or in together
with a group call or all call. The contacts are rated at
1A @ 125 VAC or 2A @ 30VDC.
PRECAUTIONARY
DESIGNATIONS
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
•
Connect cord set to unit via IEC 320 female
connector located on one end of cord set to IEC
320 male appliance coupler located on the
V-2006A.
•
For 115 VAC
use, verify fuse rating of 2 Amp
and voltage selector switch displays 115VAC.
•
For 230 VAC
use, verify the fuse rating of 1
Amp and voltage selector switch displays 230VAC.
•
After all required connections have been
made, plug the cord set into appropriate AC wall
outlet.
TECHNICAL ASSISTANCE
Assistance in troubleshooting is available from the
factory. When calling, you should have a multimeter,
several clip leads, a spare telephone test set available
and call from the job site. Call (540) 563-2000 and
press 1 for Technical Support or visit our website at
http://www.valcom.com.
The V-2006A contains no user serviceable parts and
is not field repairable. A service facility is maintained
in Roanoke, VA. Should repairs be necessary, attach
a tag to the unit clearly stating your company name,
address, phone number, contact person and the
nature of the problem. Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
To Next Page
Loading...
Need help?
General
