1 947645
Issue 2
VIP-848
Networked Input & Relay Module
INTRODUCTION
The VIP-848 Networked Input & Relay Module
allows passing of contact closures, which are
software programmable to be either form A or
form B, and initiation of VIP-601 server events
over an IP-based LAN/WAN. Multiple VIP-848
Networked Input & Relay Modules can be used on
the same network to create very large and
distributed systems.
SPECIFICATIONS
Features
8 Relay Contacts That Are Programmable To
Form A or Form B
8 Contact Closure Inputs
RJ-45 For Network Connection
Front Panel Activity LED
Removable Screw Terminal Connector
Provided For Input And Relay Interface
2.5mm Jack For DC Power
Power Over Ethernet 802.3af Compliant
No Server Required
1 to 11 Digit Dial Plans
Easy Windows Based Setup
Dimensions/Weight
1.50” H x 6.19" W x 5.88" D
(3.81cm H x 15.72cm W x 14.94cm D)
Weight: 1.00 lbs. (0.45 kg)
Nominal Specifications
Input Impedance: 10k Ohms
Relay Current: 1 AMP @ 24VDC
Protocols: DHCP, IGMP v3, UDP, TCP, HTTP,
Telnet, FTP
Nominal Power Requirements
Via Back Panel Barrel Connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch:
802.3af: Class 3
Environment
Temperature: +32 to +104°F (0 to +40°C)
Humidity: 0 to 85% Non-Precipitating
Packing List
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 389-0000
To Next Page
Need help?
General
