Valcom VIP-848 User Manual

1 947645
Issue 4
VIP-848
Networked Input & Relay Module
INTRODUCTION
The VIP-848 Networked Input & Relay Module
allows passing of contact closures, which are
software programmable to be either Form A or
Form B, over an IP-based LAN/WAN. Multiple
VIP-848 Networked Input & Relay Modules can be
used on the same network to create very large
and distributed systems.
SPECIFICATIONS
Features
 8 Relay Contacts That Are Programmable To
Form A or Form B
 8 Contact Closure Inputs
 RJ-45 For Network Connection
 Front Panel Activity LED
 Removable Connector Provided For Input And
Relay Interface
 2.5mm Jack For DC Power
 Power Over Ethernet (PoE) 802.3af
Compliant
 No Server Required
 1 to 11 Digit Dial Plans
 Easy Windows Based Setup
Dimensions/Weight
 1.50” H x 6.19" W x 5.88" D
(3.81cm H x 15.72cm W x 14.94cm D)
 Weight: 1.00 lbs. (0.45 kg)
Nominal Specifications
Input Impedance: 10k Ohms
Relay Current: 1 AMP @ 24VDC
Nominal Power Requirements
Via Back Panel Barrel Connector:
Voltage: 24VDC
Current: 325mA
Via 802.3af PoE Ethernet Switch:
802.3af: Class 3
Environment
Temperature: +32 to +104°F (0 to +40°C)
Humidity: 0 to 85% Non-Precipitating
Packing List
Qty Item
1 VIP-848
1 VSP Document
2 Mounting Brackets
4 Rubber Pads

Valcom VIP-848 Specifications

General

Brand	Valcom
Model	VIP-848
Category	Network Accessory
Language	English

Summary

Introduction

Specifications

Nominal Specifications

Input impedance and relay current ratings for the VIP-848 module.

Nominal Power Requirements

Details voltage and current requirements for powering the VIP-848 module.

Environment

Specifies operating temperature and humidity ranges for the VIP-848 module.

Packing List

Lists the items included in the VIP-848 product package.

Installation

FCC Information

Details FCC compliance for the VIP-848, intended for commercial environments.

Precautionary Designations

Highlights safety warnings and symbols related to electric shock and documentation.

Mounting

Provides instructions for wall or table mounting the VIP-848 unit.

Power Connections

Explains how to connect power to the VIP-848 using PoE or barrel connector.

Network Connection

Describes how to connect the VIP-848 to a network via RJ-45 Ethernet.

Signal Connections

Details the 16 signal connectors for inputs and programmable relay contacts.

Status Indicator Lights

Setup

Technical Assistance

Valcom Limited Warranty