________________________________________________________________________________________________________________________________
Page 4
VALEO – Product Line Valeo peiker Telematics - www.valeo.de
2. Introduction
2.1. Scope
2.1.1. Purpose of the document
The Advanced Telecommunication Module (ATM-02) roof and trunk variant is manufactured by peiker
acustic GmbH (grantee) and sold as an OEM product.
According to the US Code of Federal Regulations (47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc.),
the grantee must ensure the end-user has the applicable and appropriate operating instructions for the
device. In the case of this product the grantee must notify the OEM to notify the end-user.
Peiker acustic GmbH will supply this document to the reseller or distributor to inform him what must be
included in the end user’s manual for the commercial product and which installations guidelines for the
antenna are applicable.
2.1.2. General Information
The ATM-02 is assembled in the car during production. There are no other distribution channels than
assembly in the cars production line or spare part replacement within car service. Please be advised that
this product will need special trained professionals in configuring and installing the product. The product
will be distributed through controlled distribution channel which has special trained professionals to
install this product and will not be sold directly to the general public through retail stores.
The ATM02 trunk variant is mounted invisible to the driver in the car behind the trunk cover panels.
There are no direct interfaces to the driver or passengers. The ATM-02 is connected to the cars internal
bus and control systems. The ATM-02 uses the external antenna of the car for cellular communications.
2.1.3. Contact Information
peiker acustic GmbH
Max-Planck-Straße 28-32
D-61381 Friedrichsdorf
Germany
http://www.valeo.com
To Next Page
Loading...
Need help?
General
