Type/Mode: OSD camera•
Video standard: PAL•
Voltage: DC 12V•
Power consumption: Approx 0�8W (Max�)•
Graphic sensor: 1/3” color sensor•
Picture element: 628 (H) x 586 (V)•
Horizontal resolution: 400 TV lines•
Minimum illumination: < 2 Lux•
View angle: 133°x108°x78° (DxHxV)•
Operation temperature: Camera -30°C ~ +80°C•
Technical Parameters / Rearview camera
It is recommended that installation is carried out by an •
approved professional auto technician�
park/vision™ helps provide assistance when reversing
•
and parking� Driving skills, such as slowing down, use of
mirrors etc� are always essential�
To ensure clear view, please keep the camera lens clean
•
and keep it away from sharp items�
Heavy rain or dirt on the camera may cause blurred
•
vision�
The use of sensor tting ring may be requested to adjust
•
the angle of the camera�
If you wish to connect the system to an original navigation
•
system, please refer to your auto technician�
On some vehicles equipped with many onboard
•
electronic devices, it is may be necessary to add a
power relay�
Please ensure waterproofness of the camera in case it
•
would be tted outside the bumper.
Caution
No reset
necessary
Size : 2�48’’•
Display format : 640 (H) x 240 (V)•
Number of pixels: ~150 000•
Video mode: NTSC/PAL•
Working current < 250 mA•
Static current < 10 mA•
Working temperature: -10°C ~ +60°C•
Technical Parameters / Display
To Next Page
