© 2019 Valeport Ltd
0760824b - miniIPS Operating Manual
Page 16
8. Care & Maintenance
The miniIPS is remarkably robust, being primarily constructed of titanium. The only maintenance required, other
than periodic recalibration as necessary, is to keep the sensor as clean as possible.
· After deployment, remove the outer acetal sensor cap.
· Use the tool supplied to carefully unscrew the inner protective cap, exposing
the sensor diaphragm.
· Rinse all parts in fresh water removing any growth or debris as necessary
· Take exceptional care not to touch or damage the diaphragm itself as
irreparable damage can result
Any damage to this diaphragm will render the instrument warranty invalid.
After cleaning, simply reassemble the sensor and store in the packing case provided.
To Next Page
Loading...
