Valeton GP-200 - To match the guitar box (INPUT connector); With guitar box (using FX-Loop function front GP-200)

17
Use scene
To match the guitar box (INPUT connector)
In this scenario, simply connect the non-balanced output connector of the GP-200 to the input connector of the guitar cabinet. If
there is only one speaker, please select the L (MONO) connector first.
In order to get the correct tone performance, please keep the AMP and CAB modules closed to avoid adverse effects on the tone.
With guitar box (using FX-Loop function front GP-200)
In this scenario, connect the non-balanced output connector of the GP-200 to the RETURN connector of the guitar cabinet. In this mode, by shielding the front stage of the guitar box and
using the rear stage of the guitar box, several excellent effects in the AMP module can be matched with your rear stage to obtain realistic sound effects.
If there is only one speaker, please select the L (MONO) connector first. In order to get the correct tone performance, please keep the CAB module closed or
turn on the "No-CAB" mode to avoid adverse effects on the tone.