Vallox A3712-1 User Manual

12
SETUP WIZARD
EXPERT SETTINGS
PASSWORD AND ACCESS RIGHTS
Once you have finished up making the basic settings, the setup
wizard moves on to setting the system password.
NOTE
If you set the password as 0000, the password inquiry is not used.
1. The setup wizard for Password and access rights opens.
2. Set the first digit of the password by using the Up arrow and
Down arrow buttons. Proceed to the next digit by pressing the
Right arrow button.
3. Set the second, third and fourth digit in the same manner as
the first digit.
4. Press the OK button.
5. The password is now set.
USER LEVEL
There are three user levels:
Ć Extensive — On the extensive user level, the user can access
every menu on the control panel.
Ć Normal — On the normal user level, the user's access to
some menus is restricted.
Ć Limited — The users on the limited user level can only carry
out the basic tasks required to operate the ventilation unit.
For more information on user levels, see Chapter 9, User level
diagrams.
To set the user level, proceed as follows:
1. The setup wizard for User level opens.
2. Use the Plus and Minus buttons to set the user level.
3. Press the Right arrow button.
4. The user level is now set.
PARENTAL CONTROLS
Parental controls lock the control panel so that no damage can
be done to the ventilation unit by random pressing of the control
panel buttons.
To set the parental controls, proceed as follows:
1. The setup wizard for Password and access rights opens.
2. Use the Plusand Minus buttons to turn the parental controls
on or off.
3. Press the OK button.
4. The parental controls are now set.
ENTER THE NEW
PASSWORD HERE:
PARENTAL CONTROLS
ACCESS CODE:
1 0 0 1

Vallox A3712-1 Specifications

General

Brand	Vallox
Model	A3712-1
Category	Fan
Language	English