EasyManua.ls Logo

Valor Fires 473 Black Beauty Unigas II User Manual

Valor Fires 473 Black Beauty Unigas II
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
5115716/05
© Baxi Heating U.K. Limited 2010.
Model 473
ROOM SEALED RADIANT / CONVECTOR
GAS FIRE
Black Beauty Unigas II
(GC No. 32-810-58)
INSTALLER: Please leave this guide with the owner
INSTALLATION AND OWNER GUIDE
We trust that this guide gives
sufficient details to enable this
appliance to be installed and
maintained satisfactorily. However, if
further information is required, our
Valor Fires Technical Helpline will
be pleased to help.
Telephone 0844 8711 565 (National
call rates apply in the United
Kingdom).
In the Republic of Ireland
Telephone 0044 844 8711 565.
Question and Answer IconNeed help?

Do you have a question about the Valor Fires 473 Black Beauty Unigas II and is the answer not in the manual?

Valor Fires 473 Black Beauty Unigas II Specifications

General IconGeneral
BrandValor Fires
Model473 Black Beauty Unigas II
CategoryIndoor Fireplace
LanguageEnglish

Summary

SAFETY

APPLIANCE DATA AND EFFICIENCY

General information

Provides technical data such as inlet pressure, gas connection, and burner types.

Efficiency

States the appliance's efficiency percentage as measured in BS EN 613.

GENERAL INSTALLATION REQUIREMENTS

Regulations, Standards and Law

Details UK and Republic of Ireland regulations, British Standards, and codes of practice.

Installations into timber framed buildings

Provides guidance for installing the appliance in timber framed buildings.

Ventilation requirements

Specifies ventilation requirements for the room containing the appliance.

Fireplace clearances

Specifies minimum clearances for combustible shelves and projections around the fire.

PREPARING THE WALL

Core Drilling

Details the process of drilling pilot and flue holes using a core drill.

Combustible Walls (Wood, Fibreboard, Plasterboard etc.)

Guidance on cutting holes and installing sleeves in combustible wall materials.

PREPARING THE FLUE UNIT

CHECK IGNITION SPARK

CONNECTING THE GAS SUPPLY

CHECK APPLIANCE OPERATION

CHECK THE REFERENCE PRESSURE

SERVICING AND PARTS REPLACEMENT

OPERATING THE FIRE

To light the pilot

Step-by-step guide for igniting the pilot light on the appliance.

SERVICING AND MAINTENANCE

WARRANTY AND SERVICE

Related product manuals