EasyManua.ls Logo

Valor Fires 961 Homeflame Dream User Manual

Valor Fires 961 Homeflame Dream
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model 961
Inset live fuel effect gas fire
Incorporating the Valor Fires Control.
Fitted with one of the following fascia
Homeflame Dream,
Homeflame Harmony
or
Homeflame Petrus.
(G.C. Number 32-032-88)
INSTALLATION AND OWNER GUIDE
© Baxi Heating U.K. Limited 2009.
5136211/01
INSTALLER: Please leave this guide with the owner
We trust that this guide gives
sufficient details to enable this
appliance to be installed and
maintained satisfactorily. However, if
further information is required, our
Valor Fires Technical Helpline will
be pleased to help.
Telephone 0844 8711 565 (National
call rates apply in the United
Kingdom).
In the Republic of Ireland
Telephone 0044 844 8711 565.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Valor Fires 961 Homeflame Dream and is the answer not in the manual?

Valor Fires 961 Homeflame Dream Specifications

General IconGeneral
BrandValor Fires
Model961 Homeflame Dream
CategoryIndoor Fireplace
LanguageEnglish

Summary

Appliance Data, Efficiency and NOx

Efficiency

Measured energy efficiency of the appliance according to British Standards.

General Installation Requirements

Regulations, Standards and Law

Installation must comply with UK and local gas safety regulations and British Standards.

Ventilation Requirements

Guidance on ensuring adequate airflow for safe operation of the appliance.

Atmosphere Sensing Device (ASD)

Explanation of the safety device that monitors combustion products.

Hearth Requirements

Requirements for the non-combustible hearth material, thickness, and placement.

Fireplace Check

Fireplace Flue Pull Test

Procedure to test for proper draft and flue performance using smoke.

Gas Supply Connection

Convection Box Installation

Burner and Supply Pipe Installation

Operating and Spillage Checks

Checking Control Settings

How to operate the fire controls and understand flame behaviour.

Spillage Check Procedure

Testing for safe removal of combustion products via the flue.

Flame Supervision and Spillage Monitoring System

Explaining the safety system that shuts off gas if flames fail or spillage occurs.

Servicing & Parts Replacement

Related product manuals