SYSTEM SETUP
* DOWNMIX: to set the DOWNMIX modes of LT/RT, STEREO and VSS.
* FRONT: to select between LARGE and SMALL.
6. DIGITAL SETUP
When you open the DIGITAL menu, you will see the following picture:
* OP MODE: to set the operating modes for Dolby Digital decoder, there are LINE OUT and RF REMOD to be selected.
* DYNAMIC RANGE: you can adjust the dynamic range between 1/8, 2/8. 3/8, 1/2, 5/8, 3/4, full.
* DUAL MONO: there are STEREO, MONO L, MONO R and MIX MONO to be selected.
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL MONO
To Next Page
Loading...