EasyManua.ls Logo

Valor Homeflame Petrus User Manual

Default Icon
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model 961
Inset live fuel effect gas fire
Incorporating the Valor Fires Control.
Fitted with one of the following fascia
Homeflame Dream
Homeflame Masquerade
Homeflame Excelsior
Homeflame Harmony
Homeflame Petrus
Homeflame Classica
(G.C. Number 32-032-88)
5136211/04
INSTALLATION AND OWNER GUIDE
© GDC Group Ltd. 2012
INSTALLER: Please leave this guide with the owner
We trust that this guide gives sufficient details to
enable this appliance to be installed and maintained
satisfactorily.
However, if further information is required, our Valor
Fires Technical Helpline will be pleased to help.
In the United Kingdom
Telephone 0844 879 35 88
(National call rates apply in the United Kingdom).
In the Republic of Ireland
Telephone 01 842 8222

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Valor Homeflame Petrus and is the answer not in the manual?

Valor Homeflame Petrus Specifications

General IconGeneral
CategoryIndoor Fireplace
Vent TypeDirect Vent
Remote ControlYes
Efficiency80%
Flame EffectAdjustable
Thermostat ControlYes

Summary

Safety and Unpacking

Manual Handling Precautions

Guidelines for safe lifting and handling of the appliance to prevent injury.

Refractory Ceramic Fibres (RCF) Handling

Precautions for handling RCF, potential irritant, and waste disposal.

Appliance Data, Efficiency and NOx

General Appliance Specifications

Provides gas type, pressure, input/output, connection, and ignition details.

Appliance Efficiency Rating

Details the gross efficiency percentage and its certification.

General Installation Requirements

Regulations, Standards, and Law

Outlines UK and ROI regulations, British Standards, and Building Regulations.

Ventilation and Room Considerations

Covers ventilation needs, ASD function, fireguard, and room suitability.

Fireplace and Hearth Preparation

Details requirements for fireplace opening, floor flatness, and hearth specifications.

Pack Contents

List of Included Items

Enumerates all components included in the appliance packaging for installation.

Fireplace Check

Soundness for Appliance Attachment

Methods for securing the appliance and checking surround/floor integrity.

Fireplace Flue Pull Test

Procedure to verify adequate flue draught using smoke pellets.

Ignition Check

Electronic Ignition System Verification

Steps to check the battery and spark generation of the ignition system.

Gas Supply Connection

Connecting the Gas Supply Pipe

Instructions for connecting the rigid supply pipe to the appliance's inlet.

Preparing Appliance for Installation

Burner Unit and Window Assembly Removal

Steps to detach the burner unit and remove the window frame assembly.

Convection Box Installation

Method 1: Front Fixing

Step-by-step guide for securing the convection box via the front surround.

Method 2: Cable Retention and Floor Fixing

Steps for installing using cable retention and floor fixing methods.

Burner and Supply Pipe Installation

Burner and Supply Pipe Connection

Details on connecting the gas supply line and burner unit.

Preliminary Burner Checks

Procedures for checking burner operation and ignition before final installation.

Fitting the Ceramic Fuel Effect

Ceramic Fuel Effect Installation Guide

Refers to a separate guide for correct fitting of the ceramic fuel effect components.

Fitting the Window Frame Assembly

Securing the Window Mounting Frame

Instructions to locate and secure the window mounting frame and assembly.

Operating and Spillage Checks

Checking Control Settings and Operation

How to check control settings, pilot ignition, and burner operation.

Spillage Test Procedure

Method for testing flue spillage using a smoke match.

Fascia Fitting

Fitting Fascia: Dream/Masquerade/Excelsior/Classica

Instructions for fitting the fascia and associated components for specific models.

Fitting Fascia: Harmony Model

Steps for fitting the fascia and magnets for the Harmony model.

Final Review

Installer's Advice to Customer

Guidance for the installer to provide to the customer on operation and safety.

Servicing & Parts Replacement

Checking Aeration Setting

How to check and adjust the burner's aeration shutter setting.

Removing the Fascia

Step-by-step instructions for safely removing the appliance fascia.

Removing the Window Assembly

Procedure for detaching and removing the appliance's window assembly.

Related product manuals