Valor Dream 2 User Manual

3002499/02
INSTALLER GUIDE
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING CONVERSION KIT NO. 0591301 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE
REPUBLIC OF IRELAND (IE) ONLY.
We trust that these instructions give sufficient details to enable this appliance to be
installed and maintained satisfactorily. However, if further information is required, our
Valor Technical Helpline will be pleased to help.
Telephone 08706 061 065
INSTALLER: Please leave this guide with the owner
© Valor Heating
Dream 2
Dream 2Dream 2
Dream 2
INSET LIVE FUEL EFFECT GAS FIRE
INCORPORATING THE
VALOR
CONTROL
Model 641
(GC No. 32-032-49)

Valor Dream 2 Specifications

General

Brand	Valor
Model	Dream 2
Category	Indoor Fireplace
Language	English

Summary

Appliance Data

General Installation Requirements

Fireplace Check

Ignition Check

Gas Supply Connection

Preparing Appliance for Installation

Hotbox Installation

Burner & Supply Pipe Installation

Full Operating Checks

Check the Control Settings

Verifies correct operation of burner controls and settings.

Check For Spillage

Crucial safety check to ensure proper venting of combustion products.

Flame Supervision & Spillage Monitoring System

Checks the automatic safety system that shuts off gas if pilot fails.

Final Review

Servicing & Parts Replacement

To Remove the Ignition Microswitch

Procedure for removing the ignition system's microswitch component.

To Remove the Gas Shut-Off Microswitch

Procedure for removing the safety microswitch controlling gas flow.

To Remove the Burner Unit

To Remove the Electronic Ignition Generator

To Remove the Pilot Unit

To Remove the Shut-Off Tap