To Next PageTo Next Page
Need help?Do you have a question about the Valor 940 and is the answer not in the manual?
General| Style | Contemporary |
|---|---|
| Ignition System | Electronic Ignition |
| Fuel Type | Natural Gas or Propane |
| Finish | Black |
| Heating Area | Up to 1, 200 sq. ft. |
Guidance on safe manual handling techniques and lifting weights.
Precautions for handling materials containing Refractory Ceramic Fibres.
Details on gas type, pressure, connection, and ignition.
Information on the measured efficiency percentages for the appliance.
Compliance requirements for installation in the UK and Ireland.
Guidance on ventilation, room setup, fireguards, and wall coverings.
Steps for preparing chimneys, fireplaces, and hearths prior to installation.
Different installation methods, flue types, and specific propane fire considerations.
List of parts included in the main fire unit packaging.
Details of components included in specific fascia and accessory packs.
Methods for ensuring the fireplace can securely hold the appliance.
Procedure to verify adequate flue draft and performance.
Steps for securing the convection box via front fixing.
Steps for securing the convection box using cable retention.
Instructions for sealing the floor front of the convection box.
Connecting the burner unit and supply pipe, checking gas soundness.
Initial checks of burner operation and ignition.
Verifying the gas inlet pressure for correct operation.
Instructions for fitting fascias and connecting control linkage for various models.
Steps for fitting fire front castings and bottom covers for different fascia models.
Verifying the appliance operates correctly across all control settings.
Testing for flue spillage to ensure safe operation.
Verifying the operation of the flame sensing and safety system.
Guidelines for annual servicing, cleaning, and safety checks.
Checking burner aeration and related component procedures.
Procedures for removing/replacing ignition and gas shut-off microswitches.
Steps for removing and replacing fascias and control slide units.
Removing and replacing the burner unit, ignition generator, and pilot unit.
Procedures for replacing the shut-off tap and gas flow rate controller.
Steps for removing the main burner injector and the appliance from the fireplace.
Important safety advice for users regarding installation and operation.
Recommendations for fireguards and advice on wall coverings near the appliance.
Explanation of the flame sensing and flue blockage safety system.
Step-by-step instructions for lighting and extinguishing the appliance.
Alternative method for lighting the pilot if ignition fails.
Instructions for cleaning the metal components and the burner.
Guidance on safely cleaning the ceramic fuel effect components.
Instructions for replacing the 9V battery for the ignition system.
Recommendations for annual checks and replacing ceramic parts.
Details of warranty coverage and requirements for annual servicing.
Advice on what to do if problems occur and how to contact customer service.
