To Next PageTo Next Page
Need help?Do you have a question about the Valor Dream Fireslid 9500433 and is the answer not in the manual?
General| Brand | Valor |
|---|---|
| Model | Dream Fireslid 9500433 |
| Category | Indoor Fireplace |
| Language | English |
Covers flue, ventilation, clearances, room restrictions, and UK installation types.
Specifies metal flue systems, insulation, hearth thickness, periphery, and surround requirements.
Details ventilation needs, flue usage, sealing openings, and extractor fan use.
Instructions for unpacking, checking parts, and verifying the electronic ignition system.
Checks fireplace compliance and performs a flue pull test for proper draft.
Details on connecting the appliance to the gas supply using 8mm tubing.
Steps for disconnecting linkage, detaching burner, and fitting coal support.
Covers drilling holes, inserting eyebolts, and routing retention cables through the fireplace.
Details on sealing the convection box base and tensioning cables for proper alignment.
Refitting the burner unit and attaching the fascia panel.
Connecting the gas supply and performing soundness checks as per regulations.
Checks pilot ignition, burner flame, and reference pressure at maximum output.
Placing the front and rear base coals on their respective ledges.
Arranging loose coals to bridge gaps and create a realistic fire bed.
Checks all functions of the FireSlide control, from ignition to shut-off.
Detailed steps for ensuring no flue gas spillage occurs under various conditions.
Covers final checks, handover of guides, and operating advice.
Recommends annual servicing and outlines landlord responsibilities.
Checks for cleanliness, blockages, and proper coal refitting after servicing.
Detailed steps for removing and refitting ignition and gas shut-off microswitches.
Instructions for replacing the control knob and removing the burner unit.
Procedures for removing ignition generator, thermocouple, and pilot unit.
Steps for removing the shut-off tap and gas flow rate controller.
Procedures for removing injector, replacing plaques, and removing the appliance.
Instructions for removing the front cover and fitting a new 9V battery.
Emphasizes keeping fire clear, annual servicing, and contact points.
Step-by-step guide for positioning front base, rear base, and loose coals.
Instructions for cleaning metal parts with a slightly damp cloth.
Guidance on cleaning ceramic coals and burner, advising gentle brushing or vacuuming.
Explanation of the safety system and steps for pilot and main burner ignition.
Details on adjusting heat levels and operating the fire correctly.
Immediate actions if a gas smell is detected: extinguish flames, turn off gas, ventilate, call emergency.
Covers installation by competent person, chimney sweeping, hearth requirements, cladding, and shelf clearances.
Rules against placing items on fire, adding coals, using guards, cooling down, and hanging fabrics.
Explains Oxysafe function, relighting wait time, and heat effects on wall coverings.
