To Next PageTo Next Page
Need help?Do you have a question about the Valor 961 and is the answer not in the manual?
General| Ignition | Electronic Ignition |
|---|---|
| Model | 961 |
| Fuel Type | Natural Gas or Propane |
| Dimensions | 36" W x 18" H x 16" D |
| Finish | Black |
Installation into fireplaces with surround and hearth, requiring debris catchment.
Specific requirements for 'hole-in-the-wall' installations, including hearth depth.
Installation with metal flue boxes, specifying dimensions and hearth requirements.
Installation with precast concrete or clay flue blocks, noting dimensions and potential cracking.
Details suitable flues and minimum sizes required for installation.
Hearth requirements and clearance for mounting the appliance.
Guidance on fitting against combustible cladding, requiring removal and clearance.
Procedure for testing the flue for adequate draught using smoke matches.
Step-by-step guide for fixing the convection box to the fireplace surround using screws.
Instructions for securing the convection box using cables and floor fixing.
Steps for fitting the burner unit and connecting the gas supply pipe.
Procedure for checking flue spillage using a smoke match before leaving the installation.
Checking the operation of the flame supervision and automatic gas shut-off system.
Guidance on safely removing the entire appliance from the fireplace.
Emergency procedure to follow if a gas leak is detected.
Explanation of the Oxysafe safety system that detects abnormal flue conditions.
Step-by-step instructions for lighting the fire using the control slide.
