Valor Visage 640 User Manual

3002217/03
INSTALLER GUIDE
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING CONVERSION KIT NO. 0591301 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE
REPUBLIC OF IRELAND (IE) ONLY.
We trust that these instructions give sufficient details to enable this appliance to be
installed and maintained satisfactorily. However, if further information is required, our
Valor Technical Helpline will be pleased to help.
Telephone 08706 061 065 (National call rates apply in the United Kingdom)
INSTALLER: Please leave this guide with the owner
© Valor Heating
Model 640
(GC No. 32-032-46)
INSET LIVE FUEL EFFECT GAS FIRE
INCORPORATING THE
VALOR
CONTROL
WITH
ADORN,
VISAGE,
or
ICON Front

Valor Visage 640 Specifications

General

Brand	Valor
Model	Visage 640
Category	Indoor Fireplace
Language	English

Summary

Installer Guide Introduction and Safety

Manual Handling Guidance

Provides instructions on safe lifting techniques and precautions for handling the appliance.

Appliance Data and Installation Requirements

General Installation Requirements

Specifies adherence to UK/Irish regulations, codes, and British Standards for installation.

Pack Contents and Fireplace Preparation

Flue Pull Test Procedure

Details the smoke match test to verify correct flue draught and spillage.

Installation Procedures

Ignition System Check

Tests ignition system, checks for sparks, and diagnoses ignition faults.

Convection Box Installation

Details methods for fixing convection box via front fixing or cable retention.

Burner and Supply Pipe Installation

Installs burner, supply pipe, checks pressure, and performs preliminary burner checks.

Front Surround and Control Linkage Installation

Installs front surrounds, links control mechanisms for Adorn, Visage, and Icon models.

Operating Checks and Final Review

Full Operating Checks

Verifies control settings, burner operation, and spillage.

Spillage and Safety System Verification

Final Review and Handover

Servicing and Parts Replacement

Microswitch and Control Unit Replacement

Burner, Pilot, and Tap Component Replacement