To Next PageTo Next Page
Need help?Do you have a question about the Valor 534XAP and is the answer not in the manual?
General| Log Material | Ceramic Fiber |
|---|---|
| Burner Material | Stainless Steel |
| Fuel Type | Natural Gas or Propane |
| Ignition System | Electronic Ignition |
| Remote Control | Optional |
Covers reading instructions, qualified installation, clearances, ventilation, glass door handling, and child safety.
Steps to take if gas is detected, including handling controls.
Guidance on using correct vent systems, maintaining clearances, and airflow.
State-specific warning regarding chemicals in fuels and combustion products.
Requirements for carbon monoxide detectors and vent signage in Massachusetts.
Instructions for manufacturers regarding venting system parts and instructions.
Details on optional accessories like the Circulating Fan Kit and conversion kits.
Description of direct vent and co-linear venting configurations.
Diagrams and a table showing the main unit dimensions and clearances.
Diagrams illustrating required clearances for trims and installation.
List of certifications, standards, and codes the appliance complies with.
Details on gas type, BTU input, pressure, altitude, and wall thickness limits.
General framing dimensions and installation steps for flat on wall rear vent.
Details for vertical rise rear vent configurations including clearances and graphs.
Installation details for corner and through-roof rear vent configurations.
Procedures for rear vent installations utilizing offsets.
Requirements and diagrams for horizontal rear top venting.
Requirements for horizontal side and corner top venting configurations.
Installation guidelines for through-roof top venting.
Steps for adapting to co-linear venting systems for fireplaces and chimneys.
Table and diagram detailing required minimum clearances for horizontal vents.
Information on gas pipe entry, material, sizing, and connection points.
List of parts included with the main appliance engine unit.
Lists of parts for vent kits and optional decorative trims.
Step-by-step instructions for removing and refitting the fireplace window.
Procedure to verify the function of the pilot and electrode unit.
Instructions for installing the #817VAK adapter for wall termination.
Steps for adapting the appliance for co-linear venting systems.
Installation of heat shields and stand-offs for vent pipe.
Installation of support angles for wall finish adjustment.
Guide to fitting air restrictors based on vent configuration and pipe length.
Steps for fitting the rear ceramic support to the firebox.
Securing the appliance to the building frame using support angles.
Steps for installing the Valor #551DVK terminal on a flat wall.
Installer responsibilities for proper weatherproofing and vapor barrier sealing.
Instructions for creating wall openings for vent terminals.
Steps for preparing wall plates for the #551DVK terminal.
General steps for co-axial venting through the roof.
Steps for co-linear venting through existing chimneys.
Wiring the remote control receiver and connecting the handset.
Guidance on accessing and replacing batteries for the remote control system.
Information on gas pipe entry, material, sizing, sealant, and shut-off valves.
Procedures for testing the gas supply line for leaks.
How to adjust the air shutter for optimal flame appearance and performance.
Steps for installing the rear and side ceramic walls inside the firebox.
Steps for correctly positioning the ash bed and ceramic logs.
Checking pilot stability, burner flames, and thermostat function.
Steps for installing the #601SFB standard metal front assembly.
Steps for installing the #602CFB cast iron front assembly.
Instructions for fitting optional 3 or 4-sided decorative trims.
General guidance and safety notes for operating the fireplace.
Instructions for cleaning the glass, fuel effects, firebox, and burner.
Guidance on inspecting flames, clearances, and the vent system regularly.
Information on battery replacement and contacting for appliance service.
Step-by-step guide to programming the clock on the remote control.
Instructions for setting a desired room temperature via the remote.
How to adjust the flame height using the remote control.
Setting automatic on/off times and temperature schedules via the timer.
Important safety warnings and checks to perform before lighting the appliance.
Step-by-step instructions for safely lighting the pilot and burner.
Components for connecting vent systems to walls or roofs.
Approved flexible liners and adjustable pipe lengths for venting.
Components for routing vent pipes and sealing roof penetrations.
Items such as wall straps, thimbles, and terminal guards.
Information on warranty periods for various parts and components.
Terms, limitations, and exclusions that apply to the appliance warranty.
