Method 1 & 2
Method 3
VL100
VL100
Flip the device so that bottom is facing up.
Power off the device before plugging in our
connection type.
Ethernet: Labeled as LAN. Power down,
plug in your LAN connection and tap the
connection icon on the home screen.
Dial: Labeled by Phone Icon. Power down,
[plug in dial cable. Power on and cancel
WifI. When prompted with dial setting
select cancel to be brought to your home
screen to begin transacting.
Power on the device, Select yes (1) for
Wi, Select your SSID, Enter password
and select Green Ok Button. If you’re on
another connection type and want to
switch to Wi, Tap Connection Icon top
of touch screen and select WiFi. Follow
the same instructions as above to
connect. If this is the rst time.
Otherwise, you will connect
automatically.
Connect Your Device to the Internet
To Next Page
Need help?
General
