Need help?Do you have a question about the Valore VSU-E30AS and is the answer not in the manual?
General| Brand | Valore |
|---|---|
| Model | VSU-E30AS |
| Category | Ventilation Hood |
| Language | English |
Essential safety guidelines covering fire risk, electric shock, and proper usage.
Specific instructions on how to handle range top fires and prevent them.
Safety rules for electrical work, wiring, and installation practices.
Emphasizes adherence to codes, qualified installers, and proper grounding.
Details the required voltage, frequency, circuit protection, and wiring.
Lists all components included with the range hood.
Details the screws, nuts, and other small hardware included.
Lists items the user needs to provide for installation.
Provides a worksheet to calculate total ductwork length based on different pieces.
Advises on the maximum recommended duct length for optimal airflow.
Details minimum and maximum mounting heights above the range top.
Provides specific height measurements (A-E) for VSU, VPL, and VCR models.
Specifies duct size, material, and best practices for runs and turns.
Instructions for inspecting the unit and handling potential damages.
Critical warnings against venting into enclosed spaces and specifying duct material.
Illustrates various ducting setups like roof cap, side wall cap, and recirculating.
Provides detailed measurements for the VSU hood with a standard duct cover.
Details dimensions for the VSU hood when using an extension duct cover.
Provides detailed measurements for the VPL hood with a standard duct cover.
Details dimensions for the VPL hood when using an extension duct cover.
Provides detailed measurements for the VCR hood with a standard duct cover.
Details dimensions for the VCR hood when using an extension duct cover.
Step-by-step instructions for installing the VSU hood.
Notes on the requirement and installation of a cable locking connector.
Step-by-step instructions for installing the VPL hood.
Notes on the requirement and installation of a cable locking connector.
Step-by-step instructions for installing the VCR hood.
Notes on the requirement and installation of a cable locking connector.
Explains the need for and components of the recirculating kit.
Guides on securing the air diverter plate and filters for recirculating mode.
Details replacement frequency and care for charcoal filters.
Describes the functions of the buttons for blower and lights on the VSU model.
Explains the electronic controls for blower speed, lights, and timer.
Guidance on cleaning the hood exterior with appropriate materials.
Instructions for cleaning and removing the metal mesh filters.
Steps and precautions for replacing the hood's light bulbs.
Addresses common causes and solutions when the unit fails to power on.
Diagnoses problems like motor vibration or failure to run.
Solutions for issues with the hood lights or air venting performance.
Addresses the cause and fix for a vibrating metal filter.
Lists available replacement parts with their part numbers.
Lists optional accessories like recirculating kits and duct covers.
Details how to obtain warranty service and contact information.
Outlines what the warranty covers and common exclusions.
Explains the extent of liability and disclaimed warranties.
To Next Page
