Need help?Do you have a question about the Valore Cascade VCA-E30AS and is the answer not in the manual?
General| Power Source | Electric |
|---|---|
| Voltage | 220-240V |
| Motor Speed | 3 |
| Fan Type | Centrifugal |
| Material | Stainless steel |
| Filter Type | Aluminum grease filter |
| Lighting | LED |
| Control Type | Push button |
Do not use this fan with any solid-state control device to prevent fire or electric shock.
Observe general safety rules for fire, electric shock, and injury prevention during use.
Follow precautions to prevent range top grease fires, including unattended cooking.
Steps to take to prevent injury during a range top fire, including smothering flames.
Follow safety guidelines for electrical work, wiring, and installation to prevent hazards.
Use metal ductwork only and ensure proper operation of safety grilles and filters.
Details on electrical supply, grounding, and circuit protection needed for the appliance.
Lists all components included with the range hood package.
Details the screws, washers, and other hardware provided for installation.
Identifies necessary components that are not included with the hood.
Details the minimum duct size and type for efficient air flow and installation.
Instructions for inspecting the unit for damage upon arrival and responsibilities for repairs.
Emphasizes that all electrical work must be performed by qualified personnel.
Specifies the voltage, frequency, and circuit protection needed for the appliance.
Information on using a cable locking connector, if required by local codes.
Details how to turn the blower on/off and select between low and high speeds.
Describes how to turn the lights off, dim them, or set them to bright.
Provides instructions for cleaning the hood's exterior using appropriate cleaning agents.
Explains the purpose, cleaning frequency, and removal method for the mesh filters.
Diagnoses and fixes for when the range hood does not turn on after installation.
Troubleshooting steps for when the lights work but the motor does not engage.
Addresses causes and solutions for excessive vibration during hood operation.
Solutions for issues where the motor is working but the lights are not functional.
Identifies and resolves problems related to the hood not venting air properly.
Troubleshoots vibration issues specifically related to the metal filter.
Part numbers for common replacement items like bulbs and filters.
Information on ordering optional accessories such as recirculating kits.
Information on how to obtain service and contact the manufacturer for warranty claims.
Outlines what is not covered by the warranty and any limitations on remedies.
To Next Page
