QuadGuard
®
is a registered trademark of Valtir,LLC. Part No. 625877
© 2020 Valtir, LLC
Valtir.com 1 Revision F August 2022
QuadGuard
®
M10 [24"]
The QuadGuard
®
M10
has been tested pursuant to American Association of State Highway and
Transportation Officials (“AASHTO”) Manual for Assessing Safety Hardware (“MASH”)
specifications. The QuadGuard
®
M10 has been deemed eligible for federal-aid reimbursement on
the National Highway System by the Federal Highway Administration (“FHWA”).
Product Description
Assembly Manual
15601 Dallas Parkway
Suite 525
Addison, Texas 75001
Warning:
The local highway authority, distributors, owners, contractors,
lessors, and lessees are RESPONSIBLE for the assembly, maintenance, and
repair of the QuadGuard
®
M10. Failure to fulfill these RESPONSIBILITIES
could result in serious injury or death.
Important:
These instructions are for standard assembly specified by the
appropriate highway authority. In the event the specified system assembly,
maintenance, or repair would require a deviation from standard assembly
parameters, contact a Valtir representative. This system has been deemed eligible
by the FHWA for use on the national highway system under strict criteria utilized
by that agency.
This manual must be available to workers overseeing and/or assembling the product at all
times. For additional copies, contact Valtir at (888) 323-6374 or visit Valtir.com.
The information contained in this manual supersede all previous versions. The instructions,
illustrations, and specifications are based on the latest QuadGuard
®
M10 information available to
Valtir at publication. We reserve the right to make changes at any time. Please visit
Valtir.com/Product/QuadGuard M10 to confirm the latest revision.
To Next Page
Loading...