Valtir.com 4 Revision F August 2022
Safety Symbols
This section describes the safety symbols that appear in this manual. Read the manual for
complete safety and assembly information.
Symbol Meaning
Safety Alert Symbol:
Indicates Important, Caution, Warning, or Danger. Failure
to read and follow the Important, Caution, Warning, or Danger indicators could
result in serious injury or death to workers and/or bystanders.
Warning:
Read safety instructions thoroughly and follow the assembly directions
and suggested safe practices before assembling, maintaining, or repairing the
QuadGuard
®
M10. It is the responsibility of the installer to follow the instructions
contained in this manual. Failure to comply with these warnings could result in
increased risk of serious injury of death in the event of a vehicle impact.
Important:
Please keep up-to-date instructions for later use and reference by
anyone involved in the assembly of the product.
Safety Rules for Assembly
* Important Safety Instructions *
This manual must be kept in a location where it is readily available to persons who are skilled and
experienced in the assembly, maintenance, or repair of the QuadGuard
®
M10. Additional copies
of this manual are available from Valtir by calling (888) 323-6374 or by visiting
Valtir.com/Product/QuadGuard M10. Please contact Valtir if you have any questions concerning
the information in this manual or about the QuadGuard
®
M10.
It is the responsibility of the installer to use appropriate safety precautions when operating power
equipment, mixing chemicals, and when moving heavy equipment or QuadGuard
®
M10
components. Safety articles including but not necessarily limited to work gloves, eye protection,
safety-toe shoes, and back protection should be used.
Warning:
It is the responsibility of the installer to use all safety measures
incorporating appropriate traffic control devices specified by the highway authority.
These measures must be used to protect all personnel while at the assembly,
maintenance, or repair site.
Warning:
Failure to comply with these warnings could result in increased risk of
serious injury or death in the event of a vehicle impact with a system that has not
been accepted by the FHWA.
Warning:
Use only Valtir parts on the QuadGuard
®
M10 for assembly,
maintenance, or repair. The use of component parts not specified herein is strictly
prohibited. The QuadGuard
®
M10 assembled with Valtir parts has been tested,
approved, and accepted for use by the FHWA. A QuadGuard
®
M10 using parts
other than those specified herein has not been tested, approved, or accepted for
use by the FHWA. Failure to follow this warning could result in increased risk of
serious injury or death in the event of a vehicle impact.
To Next Page