26 Country-specific notification concerning tractor
approval. Located in the cab, on the front
housing.
27
Country-specific notification as a reference for
surface inclination. Located in the cab, on the
windshield.
28
Warning against standing too close to the
pivoting front linkage.Located on both lifting
cylinders.
29
Warning concerning hot surfaces. Located below
the exhaust pipe.
1.2.3 Maintaining hardware safety
To ensure maximum safety for the operator, maintain tractor hardware safety.
The owner is responsible for repairing any damage or wear which might
endanger the safety of the tractor.
• Cab
Take care that damages on the cab are repaired without delay to ensure the
cab's protective capability.
WARNING: If damage occurs to the cab, replace all affected parts
with new ones. Do not attempt any repair work (welding, drilling,
cutting or grinding) without first consulting the manufacturer.
• Tractor construction
Do not change the tractor construction, such as maximum driving speed or
maximum power.
The tractor is type-approved to comply with construction and use regulations.
Any changes to the tractor construction may reduce safety and durability and
affect the warranty terms.
1. Safety precautions
- 21 -
To Next Page
Loading...
Need help?
General
