Model
Code Page
11. General
111.4 16
N91c---N111c
N91h---N141h
N121LS, N141LS
1.9.2006
1.6.2008
22
Maximum permissible front-- and rear axle loadings
Regardless of any limitations due to the tyres, with standard track widths max. speed.
max 40 km/h 4000 kg
ront 4
max 8 km/h 5500 kg
Rear, max 40 km/h 8000 kg
Total weight, max 40 km/h 9000 kg
Maximum permissible front-- and rear a xl e loadings, N82h and N92h
Regardless of any limitations due to the tyres, with standard track widths max. speed.
max 40 km/h 3100
ront
max 8 km/h 3500
Rear, max 40 km/h 6000
Total weight, max 40 km/h 8000
Tyres
Rear (2.)
Speed Radius
Index (SRI)
Front (1.) N121LS, N141LS
Fixed disc
420/85R38 800 340/85R28 X
460/85R38 825 380/85R28 X
18.4R38 825 14.9R28 X
18.4R38 825 14.9R28 X X
520/70R38 825 420/70R28 X
520/85R38 875 420/85R28 X
520/85R38 875 420/85R28 X X
20.8R38 875 16.9R28 X
20.8R38 875 16.9R28 X X
540/65R38 800 440/65R28 X
580/70R38 875 480/70R28 X
600/65R38 825 480/65R28 X
600/65R38 E1 825 480/65R28 X
650/60R38 825 520/60R28 X
650/65R38 875 540/65R28 X
480/80R42 875 16.9R28 X
270/95R48 825 230/95R36 X
480/80R38 IND 825 400/80R28 IND X X
540/80R38 IND 825 440/80R28 IND X X
18.4---34/ 14 FOR 775 14.9---24/14 FOR X X
18.4---38/14 FOR 825 14.9---28/14 FOR X X
600/65R38 FOR 825 500/65R28 FOR X X
Speed Radius Index (dynamic rolli ng radius): It is used only when calculating the theoretical tractor speed according to the
ECE/EC---classification.
Always contact your dealer to ensure the right ratio is used. When track widths are adjusted or larger tyres fitted, the turning
angles have to be checked/adjusted with max turning angle of the front axle on both sides.
IMPORTANT: With cab suspension (extra equipment) and with larger tyres the gap between the tyre and the mudguard can
become too small (less than 25 mm) when the cab sinks down. This must be taken into account especially when using
chains. Adjust the mudguards wide enough.
IMPORTANT: On the traffic tractors 50 km/h the tyre loadings are smaller. Check from the tyre manufacturer’s
catalogue/catalog.