What to do if Hydraulic Oil Temperature High on Valtra Tractor?
If the hydraulic oil temperature is high on your Valtra Tractor, stop the engine, clean the hydraulic oil cooler, and check the hydraulic oil level.
What to do if Hydraulic Oil Level Low on Valtra Tractor?
If the hydraulic oil level is low on your Valtra Tractor, stop the engine and check the hydraulic oil level. Add oil if needed.
What does 'SLOW DOWN HIDASTA' mean on Valtra Tractor?
If you see the message 'SLOW DOWN HIDASTA' on your Valtra Tractor, slow down. The buzzer will stop and the display will return to normal once the transmission speed decreases sufficiently.
What to do if STOP indicator light starts flashing on Valtra Versu N174 V?
If the STOP indicator light starts flashing on your Valtra Tractor, stop the tractor and the engine immediately. Continue only in an emergency, for example, to move the tractor to the roadside.
What to do if book symbol starts flashing on Valtra Tractor?
If the book symbol starts flashing on the tractor terminal display of your Valtra Tractor, contact an authorised Valtra workshop immediately.
What does Low Fuel Pressure mean on Valtra Versu N174 V Tractor?
This message about low fuel pressure on your Valtra Tractor gives information about the pressure drop of the fuel before running faults appear.
What to do if the limiting function of the maximum engine speed is on Valtra Versu N174 V Tractor?
Avoid long-term and heavy use of the engine on your Valtra Tractor until the error is fixed.
Provides essential rules for safe operation, maintenance, and handling of the tractor.
Covers essential practices for operating the tractor safely, including hazard avoidance and personal protection.
Details safety instructions for operating with implements, including following documentation and proper installation.
Provides crucial safety instructions for towing trailers or implements, including brake pedal locking and load security.
Outlines comprehensive safety precautions and instructions for performing repair and maintenance work.
Details all the driving controls, including the emergency brake, 4WD switch, and steering adjustments.
Explains the instruments and controls used for managing auxiliary hydraulics.
Details the function and operation of the main power emergency button for immediate shutdown.
Explains the function and operation of the power shuttle lever for changing driving direction and applying the parking brake.
Covers procedures for starting the tractor under normal, cold, and auxiliary battery conditions.
Describes the automatic air conditioning system, its operating temperature range, and starting mode conditions.
Provides guidance on driving the tractor, including steering, power shuttle, parking brake, and speed control.
Explains the transmission system, including speed matching, range selection, and Powershift gears.
Explains how to use EcoPower mode for optimized fuel economy and reduced engine speed.
Provides steps for safely parking the tractor, including engaging the parking brake and lowering implements.
Details the cruise control function for maintaining constant driving or engine speed, including memory slots.
Explains the automatic traction control system for preventing wheel slip and maintaining traction.
Covers the engagement and disengagement of the differential lock for improved grip.
Details the operation of the four-wheel drive system, including ON, AUTO, and OFF positions.
Explains the anti-slip regulation system for maintaining optimal wheel slip and traction efficiency.
Describes the QuickSteer system for adjustable steering ratios, advantageous for tight maneuvers.
Covers the TwinTrac system, allowing reverse driving with a rotating seat and controls.
Explains the HillHold feature for keeping the tractor stationary on slopes.
Covers the operation of the rear linkage controls, including lifting, lowering, and draft control.
Details the three-point linkage system, including attaching implements and adjusting links.
Covers the auxiliary hydraulics system, including valve types, controls, and settings.
Provides instructions on using the front linkage, including connecting to rear valves and setting lifting positions.
Details the operation and adjustment of the pivoting front linkage.
Covers the Valtra LHLink system, including activation, adjustment, and calibration.
Provides instructions and safety warnings for using the Valtra front loader.
Covers the attachment, activation, and stopping procedures for the PTO.
Explains the U-Pilot system for automating headland turns and other functions.
Covers the ISOBUS system for connecting and communicating with implements.
Explains the Auto-Guide system for automatic steering based on GNSS.
Covers the maintenance and adjustment of various towing devices.
To Next Page
General