4.7.4.6 Changing the Skyview equipment cab recirculation filter
Change the Skyview equipment cab recirculation filter periodically.
1. Open the grille.
GUID-06EE38A5-3E3A-4A7C-BACA-47D83A5FF1C7
1. Grille fastening clip
2. Grille
2. Extract the filter element.
GUID-F2165FF4-7A28-4F8F-A4C0-211D5FE83AFE
1. Filter element
3. Change the filter element.
Make sure that the seal around the filter element fits into the grooves in the
air passage.
NOTE: Change the filter more frequently if needed.
4. Close the grille.
4. Maintenance
- 377 -