4.8.11.2 Maintaining the automatic jaw of the wagon towing device
Maintain the automatic jaw of the wagon towing device regularly.
GUID-14A798F7-CB4C-43B4-8D03-EDD1AACF2B95
1. Control unit of the puller pin
2. Main pin
3. Locking pin (2 pcs)
• Regularly clean the main pin, control unit of the puller pin and locking pins.
Do not use pressure wash when cleaning the main pin.
IMPORTANT: If the jaw is rusty, for example due to fertiliser, do not use a
rust-loosening agent for removing the rust but take it to an authorised Valtra
workshop.
4. Maintenance
- 471 -
To Next Page
Loading...
