3.8.24 HillHold
3.8.24.1 HillHold
When activated, the HillHold keeps the tractor stationary when you have stopped
on a slope with the drive direction selected. The HillHold can be activated when
the speed is less than 3 km/h.
3.8.24.2 Using HillHold
IMPORTANT: Engage the HillHold when starting on a slope. Otherwise the
tractor jerks downhill before traction engages even if the driving direction is uphill.
GUID-0D95FE0C-D403-4DE7-8DCE-06EAD939E895
1. Symbols for HillHold
When the HillHold is engaged, its symbols on the A-pillar display blink and the
parking brake symbol on the Proline instrument panel comes on.
• Engage the HillHold when starting to drive.
• Press down the brake pedals.
• Engage the forward or reverse driving direction.
• Release the brake pedals.
The tractor remains stationary until you press the drive pedal.
• Engage the HillHold when driving and stopping in a slope.
• Press down the brake pedals until the speed is 3 km/h or less and keep
them pressed.
• Move the power shuttle lever to the parking brake position.
• Move the power shuttle lever to the forward or reverse position.
• Release the brake pedals.
The tractor remains stationary until you press the drive pedal.
3. Operation
- 157 -
To Next Page
Loading...
