Need help?Do you have a question about the Valtra VALMET 8950 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Engine Cylinders | 6 |
| Transmission | Powershift |
| Transmission Gears | 36 forward and 36 reverse |
| Hydraulic Remotes | 4 |
| PTO Speed | 540/1000 rpm |
| Engine | SisuDiesel |
| Fuel Capacity | 200 liters |
| Width | 255 cm |
Details for Stanadyne injectors used in ValtraValmet tractors, including ordering numbers and pressure settings.
Instructions for bleeding the fuel system and the thermostart system to remove air.
Procedure for measuring the fuel feed pressure using a gauge, and potential causes for low pressure.
Methods for checking the overflow valve opening pressure and changing fuel feed pump valves.
Guide on how to check and adjust the injection timing for Bosch in-line pumps.
Step-by-step instructions for removing and fitting the fuel injection pump.
Procedures for checking and changing the delivery valve within the injection pump.
Guidance on how to adjust the engine's low idling speed for optimal performance.
Detailed steps for removing, inspecting, and reconditioning fuel injectors.
Instructions for fitting injectors into the cylinder head and connecting delivery pipes.
Detailed procedure for adjusting injection timing on 6800, 8750, and 8950 tractors.
Information regarding the manifold pressure compensator and cold start solenoid functions.
To Next Page