Need help?Do you have a question about the Valtra VALMET 8350HI and is the answer not in the manual?
Procedures for removing air from the fuel system and ensuring proper fuel flow.
Instructions for bleeding the thermostart system to prevent damage during starting.
Guidance on measuring fuel feed pressure using a gauge and its implications.
Steps to check the overflow valve's opening pressure against the prescribed value.
Detailed procedure for removing, cleaning, and replacing fuel feed pump valves.
Method for checking the precise timing of fuel injection into cylinder number one.
Instructions for adjusting the fuel injection timing if it is found to be incorrect.
Step-by-step guide for safely removing the fuel injection pump from the engine.
Procedure for correctly installing a fuel injection pump, including sealing and connections.
Procedure for testing and replacing the delivery valve within the injection pump.
Steps to adjust the engine's idling speed to the specified RPM range.
Instructions for the proper removal of fuel injectors from the cylinder head.
Guidance on inspecting injectors for proper function, spray pattern, and opening pressure.
Procedure to check for fuel leaks at the nozzle tip under pressure.
Detailed steps for disassembling, cleaning, testing, and reassembling injectors.
Procedure for correctly installing injectors into the cylinder head with new seals.
Instructions for fitting fuel delivery pipes, ensuring no kinks or damage.
Specific instructions for adjusting injection timing on particular tractor models.
Explanation of the boost control unit's function and its factory adjustment.
Description of the cold start solenoid mechanism and its operation.
Procedures for removing air from the fuel system and ensuring proper fuel flow.
Instructions for bleeding the thermostart system to prevent damage during starting.
Guidance on measuring fuel feed pressure using a gauge and its implications.
Steps to check the overflow valve's opening pressure against the prescribed value.
Detailed procedure for removing, cleaning, and replacing fuel feed pump valves.
Method for checking the precise timing of fuel injection into cylinder number one.
Instructions for adjusting the fuel injection timing if it is found to be incorrect.
Step-by-step guide for safely removing the fuel injection pump from the engine.
Procedure for correctly installing a fuel injection pump, including sealing and connections.
Procedure for testing and replacing the delivery valve within the injection pump.
Steps to adjust the engine's idling speed to the specified RPM range.
Instructions for the proper removal of fuel injectors from the cylinder head.
Guidance on inspecting injectors for proper function, spray pattern, and opening pressure.
Procedure to check for fuel leaks at the nozzle tip under pressure.
Detailed steps for disassembling, cleaning, testing, and reassembling injectors.
Procedure for correctly installing injectors into the cylinder head with new seals.
Instructions for fitting fuel delivery pipes, ensuring no kinks or damage.
Specific instructions for adjusting injection timing on particular tractor models.
Explanation of the boost control unit's function and its factory adjustment.
Description of the cold start solenoid mechanism and its operation.
To Next Page
General