Need help?Do you have a question about the Valtra VALMET 6800 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Engine Cylinders | 6 |
| PTO Speed | 540/1000 rpm |
| Hydraulic System | Open center |
| Max. Speed | 40 km/h |
| Rated Engine Power | 74 kW |
| Hydraulic Flow | 73 lpm |
Details on Stanadyne injectors for ValtraValmet tractors, listing types and specifications.
Step-by-step guide to removing air from the fuel system for proper operation.
Procedure for bleeding air from the thermostart system to ensure starting capability.
Method for measuring fuel feed pressure to diagnose system performance issues.
Procedure to check the opening pressure of the overflow valve for correct fuel system operation.
Steps to disassemble, clean, and replace valves within the fuel feed pump.
Method to verify the precise timing of fuel injection for optimal engine performance.
Procedure for correcting the engine's fuel injection timing for optimal performance.
Detailed steps for safely removing the fuel injection pump from the engine.
Instructions for correctly installing the fuel injection pump onto the engine.
Procedure for inspecting and replacing the delivery valve in the fuel injection system.
Steps to set the correct idling speed for stable engine operation.
Method for safely disconnecting and removing fuel injectors from the cylinder head.
Guidelines for testing injectors, checking opening pressure, and spray pattern.
Procedure to test the nozzle for leaks at specific pressures.
Steps for disassembling, cleaning, and reassembling fuel injectors.
Instructions for correctly installing injectors into the engine cylinder head.
Guidance on installing fuel delivery pipes without tension or damage.
Detailed procedure for setting injection timing on specific tractor models.
Explanation of the manifold pressure compensator's role in boost control.
Description of the cold start solenoid's operation during engine ignition.
To Next Page