Need help?Do you have a question about the Valtra VALMET 6000 and is the answer not in the manual?
Procedures for bleeding the fuel system, thermostat system, and measuring fuel feed pressure.
Steps for checking the overflow valve and changing fuel feed pump valves.
Methods for verifying and adjusting the fuel injection timing for optimal engine performance.
Procedures for removing, fitting, and general maintenance of the fuel injection pump.
Instructions for checking and changing the delivery valve within the fuel injection pump.
Steps to correctly adjust the engine's low idling speed for stable operation.
Guidelines for removing, inspecting, and testing fuel injectors for proper function.
Process for overhauling injectors and correctly installing them into the engine.
Procedure for properly fitting fuel delivery pipes to the injectors and pump.
Detailed instructions for adjusting injection timing on specific tractor models (6800, 8750, 8950).
Explanation of the boost control unit's function and its role in fuel delivery.
Description of the cold start solenoid's function during engine ignition.
To Next Page
General