Need help?Do you have a question about the Valtra VALMET 8550 and is the answer not in the manual?
Procedure to remove air from the tractor's fuel system after maintenance or component replacement.
Steps to measure the fuel pressure supplied to the injection pump using a gauge.
Method for verifying the timing of fuel injection into the first cylinder using flywheel marks.
Steps for correcting the fuel injection timing by rotating the injection pump.
Procedure to test the pressure and function of the delivery valve within the injection pump.
Instructions for cleaning, checking, and reassembling fuel injectors and their components.
Procedure to remove air from the tractor's fuel system after maintenance or component replacement.
Steps to measure the fuel pressure supplied to the injection pump using a gauge.
Method for verifying the timing of fuel injection into the first cylinder using flywheel marks.
Steps for correcting the fuel injection timing by rotating the injection pump.
Procedure to test the pressure and function of the delivery valve within the injection pump.
Instructions for cleaning, checking, and reassembling fuel injectors and their components.
General| Engine Type | Diesel |
|---|---|
| Cylinders | 6 |
| Displacement | 6.6 l |
| Transmission Gears | 36 forward and 36 reverse |
| Max. speed | 40 km/h |
| Hydraulic pump output | 73 L/min |
| PTO Power | 130 hp |
| PTO Speed | 540/1000 rpm |
To Next Page