Valtra Versu N174 V

• Shift speed range between ranges C and D.
You can change between speed ranges C and D without pressing the speed
range selection buttons when speed range C-D shifting automatics is
activated and shifting automatics is in the manual mode.
For example:
• When Powershift 5 of speed range C is engaged and you move the gear
lever forwards, the automatics shift the gear to the appropriate Powershift
gear in speed range D according to the driving speed and engine speed.
OR
• When Powershift 1 of speed range D is engaged and you move the gear
lever backwards, the automatics shift the gear to the appropriate
Powershift gear in speed range C according to the driving speed and
engine speed.
3.8.11.3 Selecting the creeper speed range
You can engage the creeper speed range with the speed range push buttons.
1
2
OFF
ON
OFF
AUTO
CONTROL
2
1
GUID-5EB211B5-030B-403F-AF0C-26A1A0F6EF64
1. Speed range selection + button
2. Speed range selection - button
IMPORTANT: Engaging the creeper range is only allowed when the tractor is
stationary.
1. Select the speed range A.
2. Stop the tractor and press down the clutch pedal.
3. Operation
- 122 -