22. Tighten the front loader frame bolts on the left hand side.
GUID-CFE893B9-321B-4AC4-AE59-5FC9AC411733
1. Front loader frame bolt
The tightening torque is 600 Nm.
23. Fit the AdBlue tank.
24. Connect the electric connector and hoses to the tank heating sensor cap.
25. Fit the engine control unit bracket.
26. Tighten the AdBlue tank fastening screws.
27. Fit the cover plate on the AdBlue tank.
28. Fit the air intake pipe.
4.7.4.8 Checking the front loader frame bolt tightness with Forest equipment
Check the front loader frame bolt tightness periodically.
IMPORTANT: The front loader frame bolt tightness must be checked every 50
hours if the front loader is used continuously with heavy loads.
Forest equipment is optional equipment.
1. Tighten the front loader frame bolts on the right hand side.
4. Maintenance
- 386 -
To Next Page
Loading...
