3.19.3 Front power take-off
Front power take-off (PTO) is only available with front linkage (extra equipment).
GUID-303EFE8A-5E6E-47D2-ABC7-13CA95BA65E2
1. Front PTO
GUID-9F41B167-49A6-44E1-BECF-3B5CD4CA846B
1. Front PTO for LHLink or pivoting front linkage
The front PTO shaft has a diameter of 35 mm with 6 splines.
GUID-C61E55BC-7E70-4637-8585-DF36660F0C65
IMPORTANT: The front power take-off shaft's nominal rotating speed is 1000
rpm and the rotating direction is counterclockwise when viewed from the front.
Check that the implement is compatible before attaching.
3. Operation
- 278 -
To Next Page
Loading...
