4. Fill the new filter with fuel.
Pour the fuel into the filter outer shell.
5. Attach the filter.
Bleed the fuel system.
4.7.5.5 Changing the fuel prefilter
Change the fuel prefilter periodically.
Always use original AGCO parts fuel filters.
IMPORTANT: Using other fuel filters than the original ones, even for a short
period of time, may cause lower performance and expensive damages.
NOTE: In extremely dusty or cold conditions, change the fuel filter and prefilter
every 600 hours.
NOTE: When using first generation Biodiesel fuel with dilution over 7%, change
the fuel filter and prefilter every 500 hours. With second generation Biodiesel fuel
the service interval is 1000 hours.
GUID-0AAD6705-EB36-455E-BEB2-9C5C4547AB8F
1. Fuel prefilter
2. Water detector
1. Clean the filter and its surroundings.
4. Maintenance
- 407 -
To Next Page
Loading...
