GUID-880D9254-A8A2-49A6-9F0E-F9BD9381508E
1. Fault indicator light and button
2. Offset pivot controller
1. Clear the fault by pressing the fault indicator button.
You can use the Valtra LHLink limitedly, if the malfunction is not in the control
valve or offset pivot controller.
2. Use the Valtra LHLink in the event of a malfunction:
You turn the Valtra LHLink manually right and left with the offset pivot
controller.
• Turn the offset pivot controller to the middle position to activate the
turning feature.
• Turn the offset pivot controller right or left to turn the Valtra LHLink.
5.7 Steering system malfunctions
CAUTION: If a malfunction occurs in the steering system, stop the
tractor and correct the malfunction before restarting.
If the oil supply from the hydraulic pump fails for any reason, the tractor can still
be steered with the steering wheel. In this case the steering valve acts as a pump
and provides oil pressure for the steering cylinder. The steering is heavier to use
than normally.
5. Troubleshooting
- 477 -
To Next Page
Loading...
