4.7.2.5 Checking the oil level in the hydraulic system
Check the oil level in the hydraulic system periodically.
1. Raise the front linkage and lower the front loader and rear linkage.
Maximum amount of oil returns to the hydraulic oil reservoir.
2. Stop the engine and let it stand for a few minutes.
3. Check the oil level from the oil level gauge.
GUID-CFD0C577-BE48-4BAB-B7A1-BC4FA51D82CC
1. Hydraulic oil level gauge
The oil level must be between minimum and maximum lines.
4. Maintenance
- 351 -
To Next Page
Loading...
