Model
Code Page
12. Layout
121.3
1.8.2005
5
N91c---N111c
N91h---N141h
N121LS, N141LS
33
Header
Tractor mo del
At the top of each page it is indicated for which tractor the page is valid.
Code designation
Three---digit code designations are used to separate the different document groups for the respective compo nents. The same
code is also used in the Time list as a reference to the text in this manual. The code designation numbers appear in the box at
thetopofthepageandalsointheheadings.
More detailed information about code designation in the next page.
Page numbers
The instructi ons for all components are numbered in conse cutive order in the right---hand box at the top of the page. The
page numbers begin with page 1 for each component.
41. Clutch
1.8.2005
Model Code
Page
N91c---N111c
411.1 1
fig002c
Date
At the top of each page there are two boxes for dates. In a case of revised issue, the date of the earlier issue is printed in the
crossed---over box and and the date of the current issue is printed in the proper date box.
Additions and amendments of the service manual
New and up---dated pages will be continuous ly added to the service manual. The new pages should be inserted as indicated
by the code:
--- the first digit (also the first digit on the index leaf) indicates the group:
--- the two first digits indicate the component or sub---group.
--- the third digit indicates the document group for the respective components
--- the page number indicates the definite position of the page within the service manual.
If there are two pages with the same code and page number, it is the page with the later date in the date box and the old date
in the crosse d---over box which is valid or which is the current page.
When an entirely new set of repair instructions is issued, it will be acco mpanied by instructions on where the pages should be
inserted in the file.
To Next Page
Loading...
