Value Hobby Aviator-Pro 60 ARF User Manual

Aviator-Pro 60
Almost-Ready-to-Fly
Instruction Manual
Specifications
Wingspan: 76.8 in (1950mm)
Length: 53 in (1350mm)
Wing Area: 775sq in (50sq dm)
Flying Weight: 6.6lb (3000g)
Product Highlights
• Light weight balsa and plywood construction
• Fiberglass cowling and fiberglass wheel pants
• Easy to setup for either nitro or electric power
• Available in red or blue covering scheme
• Rubber tires and plastic spinner included

Value Hobby Aviator-Pro 60 ARF Specifications

General

Construction	Balsa and plywood
Skill Level	Intermediate
Radio	4 channel
Wingspan	60 in (1524 mm)
Servos	5 standard servos

Summary

Disclaimer

Safety in Assembly

Safety in Flying

Before Starting Assembly

Examination

Inspect components for any damage upon unpacking the airplane.

Covering

Explains wrinkles due to wood expansion and how to remove them with heat.

Main Parts of the Airplane

Aileron Installation

Aileron Servo & Control Horn Installation

Wings Installation

Horizontal Stabilizer & Elevator Installation

Rudder and Tail Wheel Installation

Rudder and Elevator Servo & Linkage Installation

Nitro Motor Installation

Fuel Tank Installation

Electric Motor Installation

Cowling and Spinner Installation

Landing Gear & Wheels Installation

Canopy Installation

Setting CG and Control Throws

Recommended CG

Specifies the Center of Gravity location for initial flights.

Low / Precision Rates and Corresponding Exponential

Details control surface throws and exponential settings for radios.

Range Test Your Radio

Instructions for pre-flight radio system range checks and control verification.