ValueHD Corporation
40
If IPC IP address and PC IP address not in the same internet segment, IPCSearch software can modify IP
address, subnet mask and port number etc.
In IPCSearch window, select the device (IPC) needed to be modified, enter new IP in "IP" bar, subnet mask
in "Mask" bar, port number in "Port" bar, and the password (default as admin), click [modify], then the IPC
address can be modified, shown as below(For example: if your PC IP is 192.168.1.88, then IPC IP must be
192.168.1.xx, the first, second, third number must keep the same):
To Next Page
Loading...
