Accessories
Depending on your order, you can use the accessories as described below. Extra accessories
are available at your dealer.
Crank shortener
The crank shortener is fitted to the crank,
as illustrated. The pedal can then be
fitted into the crank shortener at two
positions.
With the screw [A] the crank shortener should be
aligned with the crank.
Eccentric crank
The bicycle can be fitted with an eccentric crank
on the left and/or right side. The illustration may
differ from your crank, because it is custom made.
Walking-stick holder
You can take two walking-sticks with you in the
stick holder. Place the walking-stick in the holder
at the bottom side [A] and then secure the stick in
the fastening device [B] at the top side.
Always fasten the walking-stick(s) with the Velcro
band.
To Next Page
Loading...